How To Change Pet Apearance
Steps
1.Go to GodsWar_FB folder and go to Localization>en_us>Settings>Sys.
2.Locate “Pet“, You might find 2 of them. Choose the second one and Open VIA notepad
3.Locate your pet. (Be Sure to remember the GENDER.)
4.Locate the Pet you DESIRE
5.Upon seeing the codes under your desired pet, copy the PetInfo Name and the 3 Pet Model codes
6.Replace and Paste it under your original pet.
7.Save and Enjoy
How to Make Your Pet’s Apearance look Like 8 REBIRTHS after
1) You might notice the Following in the Code
Samsara=”0″Samsara=”8″Samsara=”20″
2) Coppy The Code Under Samsara”20″ and Paste it in the code of Sasara”0″ (Replace the Code in Samsara=”0″ to the Code of Samsara=”20″)
3)Save and Enjoy
How To Change Mount Apearance.
Go to GodsWar_FB folder and go to Localization>en_us>Settings>Sy
Locate “Ride”3)Look for your mount. You might notice that there are 6 of each mount. It corresponds to the mount level. lets put Horse as an Example
[0] is Equal to Lvl40 Horse
[1] is Equal to Lvl50 Horse
[2] is Equal to Lvl60 Horse
[3] is Equal to Lvl70 Horse
[4] is Equal to Lvl80 Horse
[5] is Equal to Lvl90 Horse
(in my cas [2] since my Horse is 60)
4) Look for the mount you want.5) Under each number you would find:
[0]Name=希腊战马StatuID=1100
XFile=Ride_horse_001.jcs
TextureFile=Ride_horse_001.gwo
ActionPlayerIdle=_horse_ride_s
tand_00
ActionPlayerRun=_horse_ride_ru
n_01
AlphaRefVal=0SrcBlendFactor=1
DestBlendFactor=0ZWrite=1
CullingMode=2ZBuffer=1
AlphaComFun=4
ConstBlendValue=-1
HeadDisplayHeight=42
6) Copy only the XFile, TextureFile, ActionPlayerIdle and ActionPlayer run of the Mount you desire and paste it to the same parts of youre mount.
7) Save file and Enjoy